Jual TDA7498E Dual 160W 2 Channels Digital Audio High Power Amplifier Board Module harga terbaik

"Please note that the maximum output power is the premise that the requirements of the power supply and the speaker are all in the range recommended by the high-level language. Please pay attention to the power supply and the speaker with the appropriate impedance when pairing. For example, the 12V power supply is matched with the 8 Euro speaker. Unable to reach 160W per side.      For safety reasons, we recommend that the power supply voltage be controlled within 32V to avoid potential safety hazards caused by unstable mains power." ——Amplifier board—— Description: High-power digital amplifier output DC 15-36V power supply, with reverse polarity protection When the heat sink temperature rises to a certain extent, the cooling fan will work Support BTL 36V 3ohm mode for single channel with 220W output power Two channel stereo sound quality is very good The sound quality is very good and it can drive 4/6/8 ohm speakers. It has a sufficient and high output power of 2x160W. It supports BTL mode and when the heat sink temperature rises to a certain extent, the cooling fan will work. Characteristics: 1, high output power digital amplifier. 2 DC 15-36V power supply with reverse polarity protection. 3. When the heat sink temperature rises somewhat, the cooling fan will work. 4.Support BTL (J1, J2, J3, J4 on the back of amplifier board must be short circuit) 36V 3ohm for single channel with 220W output power. 5, two-channel stereo, the sound quality is very good. Specs: Amplifier chip: TDA7498E Operating voltage: DC 15-36V (recommended 32V, 8A, if the power is too small, distortion will appear, etc.) Output power: 2x160W Number of channels: two-channel stereo Efficiency: 85% Applicable Speaker Impedance: 4/6 / 8ohm (8ohm is best) PCB board size: 120mm x 78mm x 21.6mm Weight: 160g (approx.) Package includes: 1 x TDA7498E Digital Amplifier Board ——Power amplifier box—— Package includes: 1 x Amplifier Board BOX